￥200.6 M+
registered capital
￥200.6 M+
registered capital
100,000 ㎡+
Factory floor area
20000 units+
Annual production capacity of elevators
Company profile
Jiangsu Xide Elevator Co., LTD is the elevator industry partner of Siemens Digital Industry Group for product and system sales. Siemens Group is the world's largest electrical engineering and electronics company, with annual sales exceeding 75.5 billion euros. The company has 761,000 employees worldwide, more than 600 factories, research and development centers and sales offices around the world. Siemens has 32,000 research and development personnel in global research and development institutions. It is committed to providing the technological innovations needed to maintain and further enhance the company's market leadership. Jiangsu West ELEVATOR Co., LTD., WITH SIEMENS AUTOMATION and drive products as the main body, produces a full range of passenger elevators, sightseeing elevators, escalators and moving sidewalks and other elevator products.
The registered capital of the company is 20.6 million yuan; The factory covers an area of 105,000 square meters, and the construction area of scientific research, design, manufacturing and production is 42,500 square meters. The test tower has 4 test ladders and the building height is 108 meters. The annual production capacity of the company is 20000.
The company has A class A special equipment manufacturing license and A class A installation, maintenance and transformation license issued by the State Administration for Market Regulation; The company has obtained ISO9001:2015 quality management system certification, ISO14001:2015 environmental management system certification, ISO45001:2018 Occupational Health and safety management system certification, China Environmental label product certification, national residential project certificate; The company has obtained nearly 50 practical patents and invention patents.
Company is located in the beautiful coastal city - the east asia-europe continental bridge bridgehead lianyungang city, jiangsu province, is one of national key 14 coastal development city, adjacent to national highway G15, G25, G30, as a domestic professional elevator suppliers, jiangsu west elevator co., LTD. Has been committed to for the general customers to provide high-quality, full range of elevator products and services, To build a set of elevator R & D, design, manufacturing, sales, installation and maintenance services as one of the business segment.
Smart can assign
Modern large manufacturing workshop, construction area of more than 40,000 square meters. It has 4 machinery manufacturing workshops, 1 Siemens original imported parts library, 1 electrical workshop, 1 electrophoresis workshop, 1 automatic spraying workshop, 1 indoor and 1 outdoor delivery workshop. All kinds of large-scale production equipment more than 300 sets, intelligent manufacturing equipment in the industry leading, the realization of elevator machine, parts production and related supporting manufacturing.
Innovative talent mechanism
Pooling development momentum
Staff, is the most valuable wealth of West Germany elevator. The company attaches great importance to personnel training and actively introduces scientific and managerial talents. The innovation spirit, technical level, work ability and teamwork consciousness of employees are the biggest guarantee for the core competitiveness of the enterprise.
The company has a strong R & D ability of the engineer team, experienced technical team and modern enterprise management ability of senior management talent team, laid a solid foundation for the development of the enterprise.
Our elevator products are higher than the national standard content (elevator part)
| Num | GB7588, gauge, type gauge and GB10060 requirements | Design requirements of our company | |
|---|---|---|---|
| 1 | Energy storage polyurethane buffer can be used for passenger elevators with speed not greater than 1.0 | All our passenger elevators are equipped with energy-consuming oil buffer | |
| 2 | The span of guide bracket shall not be greater than 2.5 meters | The span of guide bracket shall not be greater than 2.0 meters | |
| 3 | No personal safety protection is required for the return rope wheel under the car | All our elevator car bottom return rope wheel has a protective cover | |
| 4 | There are no fire resistance requirements for elevator doors | Our company can provide the fire resistance requirements of the Ministry of Public Security | Standard GB27903 |
| 5 | The minimum thickness of laminated tempered glass sedan chair wall in GB is 5+0.76+5 | The minimum thickness of laminated tempered glass sedan chair wall is 6+0.76+6 | |
| 6 | The gap between car door and hall door should be at least 35MM | Our company according to 30MM design | |
| 7 | The national standard has no requirements on the type of guide boots | Sightseeing ladders and lifts greater than 2.0m/s are equipped with rolling guide boots | |
| 8 | The bottom requirement for heavy guardrail national standard can be mesh type | Our standard configuration is non-hole type | |
| 9 | The standard has no requirement for screw strength, as long as it meets the mechanical design requirements | Our screws are not 4.8 grade black, all are not less than 8.8 grade galvanized type | |
| 10 | The National standard requires that the car roof guardrail should be added only when the outside of the car reaches more than 300 to the well wall. | All elevators of our company have guardrail, and the height is not less than 720 | |
| 11 | The national standard requires that the diameter of the traction wheel is at least 40 times that of the wire rope | Our 1.5m/s above the elevator rope wheel ratio is 50-61 times | |
| 12 | The weight guardrail shall be set between the car and the weight | Our company adds the setting of the heavy side, when the gap between the heavy guide rail and the well wall is greater than 300, add the protection requirements | |
| 13 | Standard for layer door strength requirements: 300N static test: Maximum elastic deformation: 15mm Maximum permanent deformation: 1.0mm 1000N static test: Maximum clearance: 10mm Maximum clearance after convex passage in the gate impact test: 120mm |
Our company's floor door strength report measurement: 300N static test: Maximum elastic deformation: 9.95mm Maximum permanent deformation: 0.15mm 1000N static test: Maximum door clearance: 6.40mm Maximum clearance after convex passage in the gate impact test: 75mm Well above standard requirements |
|
| 14 | The standard requires a compensation chain to be added to lift heights greater than 30m | Part of our ladder from 15 meters to increase | |
| 15 | The standard has no special requirements for decorative top plate and lamp source | Our AC vertical plate is flame-proof type, the lamp source is LED energy saving type | |
| 16 | The standard has no requirement on the structure of the compensation chain | Our company is equipped with plastic coated compensation chain for elevators larger than 1.75m/s, and ordinary compensation chain for elevators below 1.75m/s | |
| 17 | There is no Braille touch requirement for the HOP@COP button | Our HOP@COP button with Braille touch | |
| 18 | At rated speed (V≤2.5m/s), the average noise value in the room is ≤80 | Our company designed the rated speed (V≤2.5m/s) when the average noise value in the room is less than or equal to 60 | |
| 19 | (V≤2.5m/s) The maximum noise in the car during operation is ≤55 | Our design (V≤2.5m/s) in operation, the maximum noise value in the car is less than 45 | |
| 20 | The balance coefficient of traction elevator should be in the range of 0.4 ~ 0.5 | Our design requires that the balance coefficient of the traction elevator should be in the range of 0.46 ~ 0.48 | |
| 21 | When the elevator runs independently of the phase sequence, the wrong phase protection device may not be set | Our company standard configuration of phase sequence device, with the power supply system phase break, misphase protection function | |
| 22 | Protection device when exceeding the upper and lower limit working position | Our company standard equipped with the protection device when exceeding the upper and lower limit working position and the protection device when exceeding the upper and lower limit working position, with high and reliable dual protection function | |
| 23 | The accuracy of the flat floor of the elevator car should be within the range of ±10mm. The accuracy of the flat layer should be within ±20mm | Our company standard optical level layer device, elevator car flat floor accuracy to reach within the range of ±3mm, flat floor accuracy should be within the range of ±10mm | |
| 24 | The A95 peak-to-peak value of the vertical (Z-axis) vibration of the passenger elevator car running in the constant acceleration region should not be greater than 0.2m/s2 | The A95 peak-to-peak value of the vertical (Z-axis) vibration of the passenger elevator car running in the constant acceleration region should not be greater than 0.15m/s2 | |
| 25 | The A95 peak-to-peak vibration of the passenger elevator car during operation (X and Y axis) should not be greater than 0.15m/s2 | The A95 peak-to-peak vibration of the passenger elevator car during operation (X and Y axis) should not be greater than 0.10m/s2 |
Address:100-9 Shengshi Road, Ganyu Marine Economic Development Zone, Lianyungang, Jiangsu Province, China
Phone/Tel:0518-80200888
Phone/Tel:0518-86201699
